 |
Service Mat Sets |
Every one knows that the discharge of static electricity can
damage electronic components on the PCB's used in a variety of products.
Managers are concerned mainly about the thread of ESD on the
manufacturing floor. They usually implement ESD Control Mechanisms to
limit or eliminate Static Electricity. Same or similar measures should
be undertaken when working in the field and servicing Electronic
Equipment. First and very basic protection against ESD in the field is
FIELD SERVICE MAT SET, including a mat, grounding wire and a wrist
strap.
We are offering below a selection of Field Service Mat Sets
produced by different manufacturers so that everyone can have one tailored to his taste and likings.
 |
AFSK1
Service Mat Set with 6ft grounding wire and a wrist strap
The Service Mat Set Includes:
- Service mat -size 23.1" x 23.1" (60 x 60 cm)
- Wrist strap with 6' coil cord
- Grounding Wire with banana plug and alligator clip
- Convenient Carrying Pouch
|
 |
CHW 16475a
Field Service Kit
Complete with a canvas, carry-all pouch, this portable kit
creates a static-safe work area for the field technician during
service calls. The adjustable wrist strap, with a built-in 1MΩ
resistor and 6-ft. coiled ground cord, fits any wrist and provides an
effective means of dissipating static charges from personnel. The red
static-dissipative vinyl mat, with its 15-ft. common point ground
cord, provides an attractive, low tribocharging, protective work
surface that will conduct charges to the ground. The mat measures
18" x 22", is 18 mil thick, has a surface resistivity of 108
- 109 ohms, and comes with two female snap fasteners
installed.
|
|
